The ideal safety system - Honeywell’s Touchpoint Pro makes gas control system design, installation, configuration and operation simple. Touchpoint Pro uses a ‘building block’ approach, providing unrivalled flexibility.
Touchpoint Plus brings a whole new control experience to your small system of gas detectors. Touchpoint Plus is an easily configurable, wall mounted control system that supports up to eight channels of gas detection. Its modular approach enables you to take control and configure what you need for a wide range of applications.
The Multiscan++S1 is a multifunctional gas warning centre (ATEX and SIL1) which enables the connection of up to 256 gas detectors. The following versions are available: 16, 32, 64, 128 or 256 channels.
The Multiscan 8+ is a multifunctional gas warning controller for smaller systems with up to 16 gas detectors. Thanks to its high flexibility, gas detectors connected via a transmission signal of 4-20 mA or an addressable bus, can be monitored.
Microprocessor-controlled system for the detection of gas, intended for connection of max. 6 or 8 probes.
Measuring, warning and controlling device series, for toxic and combustible gases and vapours.
Gasmesscomputer 2-Kanal für den Einbau in Normfeldverteiler oder den Einbau in 19"-Baugruppe.
The Unipoint is a simple DIN rail mounted controller offering integrators a flexible and low cost solution to incorporate flammable, toxic or Oxygen gas detection into their control systems.
XNX is an extremely flexible transmitter that can be configured to accept an input from any of the Honeywell Analytics range of gas sensor technologies.
For over 40 years our company has been a world leader in the design and manufacture of gas detection instrumentation.
Ultrasound monitoring with the aid of a solid state sensor. This enables gas leaks to be detected even in highly adverse environments and unfavourable weather conditions.
The Searchline Excel is the World’s best selling infrared open path gas detector with over 6,000 units installed in challenging applications throughout industry.
The Sensepoint XCD (Exceed) range of fixed gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard to working environments.
The RAEGuard 2 PID is a fixed photoionization detector (PID) that measures a broad range of volatile organic compounds (VOCs). The RAEGuard 2 PID operates on 10 to 28 VDC and provides an analog (4-20mA) three-wire signal output, and RS-485 Modbus digital signal output.
Midas is a gas monitoring system for fast and reliable response to the presence of virtually all of the gases used or generated in the Semiconductor and other industrial manufacturing applications.
Sensepoint XCL is a fixed point gas leak detector that is designed to meet the needs of commercial and light industrial applications. Honeywell innovation enables customers to pair the gas detector with their mobile phone, and then use an app to perform many tasks related to installation, commissioning and maintenance.
Sensepoint XRL is a fixed point gas leak detector that is designed to meet the needs of industrial applications. Honeywell innovation enables customers to pair the gas detector with their mobile phone, and then use an app to perform many tasks related to installation, commissioning and maintenance.
The Satellite XT is the simple solution for all “Point-of-Use” gas detection needs. Based upon the market’s smallest and most reliable electrochemical cell technology, the Satellite XT offers flexibility, simplicity and ease of application. The Satellite XT can be purchased in either an analogue or digital configuration, allowing it to interface with new or existing facility control technologies.
Improve safety and productivity with the most flexible, user-friendly tape-based gas detector for low-level toxics.
Vertex M is one of the industry’s most flexible, advanced toxic gas monitoring systems offering parts per billion detection levels and physical evidence of a gas leak. Vertex M ensures productivity as well as life safety.
Gas sensor with electro-chemical measuring cell CO 0 - 300 ppm / NO2 0 - 20 ppm.
Gas sensor with electrochemical measuring cell for monitoring the refrigerant R1234ze (0-1000 ppm).
Refrigerant gas transmitter with semi-conductor sensor for monitoring leakages of cooling agents like HFC (hydrofluorocarbon) or HCFC (hydrochlorofluorocarbon). The semi-conductor typical, non-linear signal is translated into a linear, temperature-compensated output signal.
The MF420-IR-CO2 gas measuring system identifies carbon dioxide concentration in the air using a specific infrared sensor in ambient temperatures from -10 to +50°C. It is compact, robust and maintenance-free in normal conditions.
The Sensepoint range of flammable, toxic and oxygen gas detectors offer users a low cost solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres.
SMART3G gas detectors are used to detect flammable (%LEL) or toxic substances (ppm), refrigerant gases and oxygen content.
Robust optical signaling device for use in potentially explosive atmospheres (Zones 1 and 21).
The horn is designed as a stationary device of equipment group II, Category 2 for use in potentially explosive areas.
Warning light with pictogram. In case of emergency it calls too turn off the engine, to leave the place or not to enter the place.
Modern Light Box with LED lighting with one side identifiable information !O2 Mangel!
Light Box as two-line note disc information "OXYGEN and ALARM" unilaterally recognizable
Simple to use, single gas warning device for the detection of toxic gases, explosive and flammable gases, ionizable hydrocarbons (VOC), carbon dioxide and oxygen. Continuous data logging with optional wireless function for transmitting measurement data to a command centre in real time.
The BW Clip series as a single gas warning device for two or three-year operation. The unit is maintenance-free and does not require any change of sensor or battery.
Single gas warning device for oxygen and toxic gases. No tools are required to change the sensor or filter. The configuration can be set up via a smartphone with the configurator app.
Depending on the version, the MultiRAE offers the detection of oxygen, VOCs, flammable gases, gamma rays, toxic industrial chemicals and at the same time up to 6 types of hazard (with combi-sensor). It is available as a pump and diffusion version and offers a large selection of sensor options. The continuous logging of data as well as the optional wireless function improve safety at work through real-time access to instrument values and alarm status.
The MultiRAE Benzene is the only gas monitor which comprises the detection of up to 6 gases (with combi-sensor) in real time, including additional benzene-specific measurement. A fast benzene-specific evaluation measurement with the benefits of a multi-gas monitor which can support around 20 intelligent, interchangeable sensor options. The optional wireless function improves safety at work by giving Safety Officers real-time access to instrument values and alarm status.
Handy gas warning device for measuring up to 4 gases and available as a pump and diffusion version. Read-out of gas concentration and alarm status in real time.
The handy MicroRAE is a diffusion detector which simultaneously monitors up to four gases including H2S, CO, O2 and flammable substances (LEL). With various options for wireless communication to transmit measurement values and alarm status signals (incl. dead man alarm) to other wireless systems such as the Safety Communicator app on smartphones or tablets in real time.
The handy, compact GasAlertMicroClip XL offers effective protection from dangerous gases. Simple, one-button operation provides the greatest possible user-friendliness, thereby significantly reducing the degree of training required for users.
The MicroClip X3 offers a three-year warranty and a completely new O2 sensor which extends the total expected operating time to 4 years. Simple, one-button operation provides the greatest possible user-friendliness, thereby significantly reducing the degree of training required for users.
The robust and reliable 4 gas warning device can be used to simultaneously measure the concentration of four gases. It can be operated with rechargeable batteries or a battery pack and charged via an in-car charging cable. The gas warning device is thus ready for use at all times.
The robust GasAlertMax XT offers reliable monitoring of up to four gas hazards and combines simple, one-button, on-site operation in its various versions with a built-in gas sampling pump or diffusion. Options that can be set by the user enable the unit to be individually adapted to your application.
Portable 5-gas warning device, specifically for sampling and monitoring in tight spaces (diffusion). First gas warning device with fast, reliable response and long sensor life. Comfortable 1 button operation.
The UltraRAE 3000 is a substance-specific PID meter. The extended measurement range from 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode make it the ideal instrument for applications in refineries, workplace hygiene as well as in the environmental and hazardous goods sphere.
The MiniRAE 3000 is a portable, hand-held measurement device for volatile organic compounds. With the extended measurement range of the Photo Ionisation Detector (PID) from 0 to 15,000 ppm, this measurement device is ideally suited to a wide range of applications, from health and safety at work, fire service deployments all the way to tracing leaks and monitoring hazardous goods.
The MiniRAE 3000 is a portable hand-held measurement device for volatile organic compounds in the ppb range (from 1 ppb to 10,000 ppm). The measurement device is ideally suited to a wide range of applications, from health and safety at work, fire service deployments all the way to tracing leaks and monitoring hazardous goods.
The Gas Analyzer was developed for fast and easy online measurement of tetrachloroethylene or trichloroethylene.
The Gas Analyzer was developed for fast and easy online measurement of IR-active gases.
The Gas Analyzer was developed for fast and easy online measurement of IR-active gases.
Measurement of CH4 and CO2 via patented and long-run stable infrared measurement procedures.
For monitoring threshold concentrations with gas mixtures containing solvents and surface treatment.
Transportable gas measurement system for flexible field deployment in biogas, landfill and sewage treatment plants.
The BlueInOne Cell is specifically adapted to the measurement of CO2 and O2 in biotechnological cell culture processes. It can be installed directly in the exhaust gas flow where it measures gas concentrations online and in real time.
Electrochemical sensors (O2 0-100 vol.%) and IR sensors (CO2, CH4) for the online monitoring and measurement of biological processes.
The BlueVary consists of a base station with three slots for sensor cartridges. Two different gases can be measured simultaneously. The third slot contains a special pressure and/or humidity sensor cartridge. Continuous online monitoring of your fermentation for cell culture, microbial, algae, fungal or biogas processes.
Mixed systems for 2 or 3 defined gases specifically for fill and seal and vacuum packaging machines or other continuous packaging processes in the food industry.
Cordless one-hand analyser for preventive shelf-life monitoring of Modified Atmosphere Packaged food (MAP). For mobile, fast, precise spot checks directly on the packaging machine, in the warehouse or laboratory. Minimum sample volume (10 ml / 2 ml) and measurement time (10 s / 6 s).
Desktop analyser for monitoring modified atmospheres in food packaging technology (MAP). For continuous monitoring of gas mixtures (in-line) and sample analysis by means of suction needle, e.g. from food packaging.
Portable multi-function analyser for monitoring modified atmospheres in food packaging technology. For continuous monitoring of gas mixtures (in-line) for up to three gases and sample analysis by means of a suction needle. Short measurement period, minimum sample volume, touchscreen operation.
System for leak testing packaging in a water bath. The LEAK-MASTER® EASY enables even the tiniest leaks to be detected, also in vacuum packaging.
Portable electronic control unit for the LEAK-MASTER® EASY leak test device. Used in combination with the LEAK-MASTER® EASY, enables even the tiniest leaks to be detected by non-destructive means without the costly use of helium as a trace gas.
System for leak testing packaging on the basis of CO2. The LEAK-MASTER PRO enables even the tiniest leaks to be detected by non-destructive means without the costly use of helium as a trace gas.
The 11-D covers a very wide range of applications where dust mass or particle count are of interest: PM2.5 particulate matter in interior spaces under VDI 4300 Part 11, dust contamination at the workplace pursuant to EN 481 with high temporal resolution or indicative measurements of particulate matter in the outside air.
The first portable compact unit for registering pollution from particulate matter and ultra-fine particulates in interior spaces. Continuous data can be registered (incl. via Bluetooth), and the number, size and mass of airborne particles in the range of 10 to 25,000 nm can be read out in 40 size channels with a temporal resolution of only one minute.
Certified environmental dust meter for measuring PM values. The unit offers outstanding features for the simultaneous measurement of PM values in 31 size channels, a resolution of 0.1 μg/m3 and an isothermal inlet with a Nafion dryer.
The Nano product line offers a variety of high-precision instruments as portable or fixed systems, also available for outdoor areas.
The nitrogen oxide analysers in the nCLD 6x Series are the economical alternative for continuous, precise, reliable measurement of NO, NO2 and NOX in fixed and mobile applications.
The nCLD 800 Series for various applications including ambient air, exhaust emissions, combustion and process monitoring in gas production. Equipped with the latest graphic user interface and connections for data transmission, calibration and operation, adapted to meet individual requirements.
The nCLD Supreme Series is the next generation of dual-channel emissions monitoring units. Unique in terms of measuring speed and reliability. The unit is modular in structure and facilitates the continuous analysis of NO, NO2, NOx (NH3 and NOx amines) in exhaust fumes and further applications with NOx concentrations extending into the ppt range.
The nCLD AL (single-channel) and nCLD AL2 (dual channel) represent the next generation for the high-precision monitoring of ambient air and processes. Unique in terms of measuring speed and reliability. The units are modular in structure and enable the sequential or simultaneous measurement of NO, NO2 and NOx.
Gas analyser for a range of applications for monitoring several gases in the ppb range: SF6 and refrigerant leak measurement, monitoring of anaesthesia and greenhouse gases, emissions monitoring, health and safety at work, soil and photo-catalysis, animal husbandry.
The GASERA ONE FORMALDEHYDE is based on photo-acoustic measurement technology combined with a quantum cascade laser source which is operated in the mid-infrared range with a spectral absorption line of formaldehyde. This enables formaldehyde to be reliably measured in the background environment.
Das Probeentnahmesystem ECOBEAT wurde für die Überwachung von Kälte- und Wärmeträgernkreisläufen entwickelt (Wasser NH4/Glykol NH3). Ionenselektive Sonden gewährleisten eine frühzeitige und zuverlässige Erkennung von Leckagen im Kreislauf.